WTI & Brent Oil Trading BotAI Auto-Trade Extension for every major browser

Turn your browser into a crude oil trading bot. The Live AI follows WTI and Brent tick by tick through the energy day (from the European open to the New York settle) flags only the BUY and SELL setups that pass your filters, and reacts in under 10 milliseconds. Click the entries yourself, or let the bot auto-trade them for you.

  • Oil Trading Bot
  • WTI Signals
  • Brent Signals
  • Crude Oil Robot
Step-by-Step Setup

Get your free WTI & Brent Oil bot license

Activate your free license, then follow the guide for your browser to install the extension and start reading live WTI & Brent Oil signals.

Step 1 of 2

Get License

Activate your free license

Activate your free lifetime license and switch on every AI strategy, no credit card and no trial countdown. Message support from the button below and they will confirm it in minutes.

Crude bot overview

Oil Trading Robot That Follows WTI and Brent Through the Energy Day

An oil trading robot is worth having when crude can run through a level faster than you can react. This browser extension turns Chrome or Firefox into one: it follows WTI and Brent tick by tick through the energy day, from the European open to the New York settle. Whenever a BUY or SELL setup clears your filters, the panel flags it in under 10 milliseconds. Frame the range on a slower H4 chart, drop to M5 for the New York energy open, and either click the entry yourself or let the bot auto-trade it.

Oil Trading Robot for WTI & Brent
WTI Scalping Bot Under 10ms

Energy-open speed

WTI Scalping Bot Reactions Under 10ms at the New York Energy Open

When crude reprices at the New York energy open, the move can be over before a manual click lands. The panel reads the chart, scores every strategy and fires a BUY or SELL before the next tick prints. Local evaluation inside your browser means nothing waits on a cloud round-trip, which is how a WTI scalping bot keeps its reaction under 10ms on WTI or Brent. Fast Trades is the built-in strategy that scalps that open. Remember the speed is the bot's reaction, not your broker's fill: slippage on fast tape can still happen, and trading carries risk of loss.

Smart Trade Sizing

Crude Oil Auto Trading Software With Fixed or Percentage Sizing

Automation places orders faster than you can second-guess them, so decide the size of each one before crude starts moving. Smart Trade Sizing gives you two rules: stake a fixed dollar amount per trade, or a percentage of your balance. A fixed amount keeps every stake the same, while a percentage rises and falls with your account. Pick once in the popup and risk stays consistent through every order, including the quick ones the bot fires on a trend day. Consistent sizing keeps each loss in proportion rather than preventing it, because trading crude oil CFDs carries risk of loss.

Crude Oil Auto Trading Software
Trading Bots for Crude Oil

Energy coverage

Trading Bots for Crude Oil, Natural Gas and Refined Products

Crude is only part of what the energy board covers. Alongside the two crude benchmarks, WTI as USOIL and Brent as UKOIL, the extension reads natural gas, heating oil and gasoline as your broker quotes them. Not every oil trader wants gas or refined products in the panel, so the energy whitelist in the popup lets you toggle each market on or off. Switch a market off and it leaves the feed for the rest of the session. Keep WTI and Brent alone for a crude-only day, or add natural gas when you follow the wider energy complex.

Inventory-day demo

Run the Oil Bot on Demo Through an Inventory Wednesday First

Demo is the default the day you install, and a fast inventory day is a fair test of any oil bot. Leave it on your broker's demo balance through at least one inventory Wednesday, when the weekly EIA report lands, and let the panel list setups while you click the ones you like. After the release, the signal log shows what fired and what got skipped, each with its reason. Once you trust that behavior, switch on Auto-Trade and flip one toggle to go live with nothing to re-configure. Demo fills are not live fills, and trading crude oil carries risk of loss.

Run the Oil Bot on Demo First
Signals Coverage

Live Signals Across
the Energy Complex

Every signal comes from the energy board you configure: the WTI and Brent crude benchmarks plus natural gas and the refined products retail brokers actually quote. Filter the list to find the markets you trade.

WTI Crude
Brent Crude
Natural Gas
Heating Oil
Gasoline
Built for discipline

Eight Disciplines,
Tuned for Energy

Crude can run through a level faster than a human can react. Every control in this panel (from the under-10ms local reaction to a signal log that explains every skip) exists to keep an oil trader consistent through fast tape.

Core speed

Under-10ms Reactions

When crude repricings hit, the move is over before a manual click lands. The panel reads the chart, scores every strategy, and fires a BUY or SELL before the next tick prints: evaluation runs locally in your browser, so nothing waits on a cloud round-trip.

Local evaluation · broadband-grade
Risk-free start

Demo & Live, One Toggle

Run the panel on your broker's demo balance through a full week of energy sessions, inventory day included, then flip one toggle to go live. Same strategies, same guard rails, same signal log, nothing to re-configure.

No subscription

Lifetime License

Open an account with one of our partner CFD brokers and the extension unlocks free for life. Rather pay once? A single $50 payment buys a lifetime license, no monthly fee, no auto-renew, and updates ship to your install automatically.

Three Built-in Strategies

Fast Trades scalps the New York energy open, Turbo Breakout rides crude when it leaves a range, and Master AI adapts when the barrel drifts sideways. Swap mid-session in one click: every strategy carries a backtested win rate.

Energy Whitelist

Trade only the contracts you follow. Toggle the crude benchmarks, natural gas and the refined products on or off from the popup: muted markets vanish from the bot for the session, so one setting shapes the whole feed.

Multi-Timeframe

M5 for the New York energy open, M15–M30 for setup confirmation, H1–H4 for swings that ride a trend day out. Switch any time from the popup without losing your session.

Audit

Every Skip Has a Reason

Open the signal log and every energy signal the bot saw is there (executed, filtered, or skipped), each row tagged with exactly why the bot decided what it did. Audit a fast inventory day trade by trade, hours after the dust settles.

Smart Trade Sizing

Stake a fixed dollar amount per trade, or a percentage of your balance. Pick once and risk stays consistent through every order, including the fast ones the bot fires on a trend day.

Trusted by traders

What Oil Traders Are Saying

Demo through two
inventory Wednesdays.

I wanted to see how it behaved on the fastest tape crude gets, so I left it on my broker's demo balance through two EIA inventory Wednesdays before going live. The signal log after each release showed exactly what fired and what got skipped: that audit is what sold me.

Brent only, everything
else muted.

I trade Brent and nothing else. Muting WTI, gas and the products from the whitelist took ten seconds and the feed has been clean since: one market, one strategy, no noise pulling me into contracts I do not follow.

Turbo Breakout on
trend days.

Crude spends weeks in a range and then leaves it in an afternoon. I keep Master AI on for the quiet stretches and swap to Turbo Breakout when WTI breaks a level that has held all week: the one-click strategy switch without restarting the panel is the feature I use most.

Percentage sizing kept
my risk honest.

On fast oil days I used to size up emotionally. Setting 2% of balance per trade once in the popup means every Auto-Trade order carries the same risk whether crude is drifting or running: my equity curve got a lot less jagged.

Free lifetime license
via the partner broker.

Support walked me through opening the partner CFD account and activated my lifetime license the same day, no card and no subscription. I run WTI and Brent on M15 and the panel has handled every session since without asking for my broker password.

Manual first,
Auto-Trade later.

I clicked every signal manually for the first month: the panel just listed setups and stayed out of the way. Once my hit rate on its Brent M30 calls matched what I saw in the log, I switched Auto-Trade on for London mornings only. Having both modes in one toggle is why this stuck.

Past performance is not indicative of future results. Trading crude oil and energy CFDs involves substantial risk; review the full Risk Warning before enabling any automated execution.

Frequently Asked Questions

Is using an oil trading bot allowed?

Yes. The extension only reads the same chart you already see in your broker tab and clicks the same buttons you would. It never touches the broker's servers or alters price data. Trading crude oil CFDs still carries substantial risk; review the Risk Warning before you enable Auto-Trade.

Which energy markets does it cover?

The two crude benchmarks, WTI (USOIL) and Brent (UKOIL), plus natural gas, heating oil and gasoline as your broker quotes them. You choose which markets stay on from the popup whitelist; muted markets disappear from the feed for the session.

Does it work with my CFD broker?

The extension docks into your broker's web platform in Chrome or Firefox. It is built and tested against our partner CFD brokers first. Message our 24/7 support with the broker you use and they will confirm compatibility before you install anything.

Is this oil CFDs or futures?

Spot CFDs at your broker: USOIL and UKOIL as your platform quotes them. It does not trade NYMEX or ICE futures contracts, so there are no contract months, rollovers or margin calls to manage.

Can I test it on a demo account first?

Yes, Demo is the default the day you install. Many traders run it through at least one inventory Wednesday on the demo balance first, audit the signal log, and flip to live only when they trust what they see.

How do I unlock the free license?

Two routes: open an account with one of our partner CFD brokers through our 24/7 support team and the lifetime license is free, or buy a lifetime license outright for a one-time $50. No subscription and no card on file either way.

Does it auto-trade or just signal?

Both, and you choose. Out of the box the panel only lists setups. You click the ones you want. Turn on Auto-Trade and it fires every confirmed setup with the trade size you set, and every action lands in the signal log either way.

What timeframes suit crude oil?

The panel runs M5 through D1. Most oil traders confirm on M15–M30 and keep M5 for the New York energy open, where WTI and Brent do most of their repricing. You can switch timeframes mid-session without losing your settings.

SignalBots Partner Program

They trade.
You earn: 40% for life.

Hand your audience the free WTI & Brent Oil auto-trader: the AI fires every signal for them, so they keep trading and you keep earning on every trade.

  • 40% lifetime
  • Paid monthly
  • No caps
Become a Partner 2-minute signup · keep your own brand
Estimate your commission Recurring
25 × X estimated recurring monthly commission

X = your commission from one baseline trader ($500 deposit, $50k monthly volume). Illustrative only: your real payout scales with the broker’s IB rate and your referrals’ actual trading.

SignalBots operates as an Introducing Broker and Master IB. Commission is paid on your referrals’ trading activity, not on recruitment. Trading carries substantial risk. See our Risk Warning.

USOIL

BUY SIGNAL
5m ago
+1.24%

UKOIL

SELL SIGNAL
5m ago
-0.86%

SignalBots

Live Signals

USOIL

Entry 63.42

SL 62.90

BUY

UKOIL

Entry 67.15

SL 67.80

SELL

Trade WTI & Brent
With an AI That
Never Blinks

Crude oil signals, automated execution tools, and a
signal log you can audit, all running locally
inside your own browser.

Activated by our 24/7 support 100% free for life
Activated in minutes
Unlocked by 24/7 support
No payment required